For conductive and non-conductive liquids
Measure range <0,2m3/h ÷ >400000 m3/h
Accuracy ± 1%
Clamp on IP68 sensors also for high temperatures
Pipe dimension range: DN20 ÷ DN4000
Datalogger via SD card or via MODBUS
Heat meter
The SGM-101F flowmeters operate on the ultrasonic pulses transit time difference principle. The great advantage is the mechanical installation, because it is not necessary to cut the pipe. The sensors are simply clamped on the outer pipe surface, for this reason the pressure and the liquid aggressiveness to be measured are not a problem for the fl owmeter. The system measures in a bidirectional way and is suitable for clean or slightly dirty liquids.
| Pipe dimension range | DN20 ÷ DN4000 |
|---|---|
| Transmitter protection class | IP66 |
| Transducer protection class | IP68 |
| Display | backlighted 2×20 alphanumeric digit |
| Keypad | 4 keys |
| Housing material | aluminium |
| Displayed data | instantaneous flowrate; flow totalizer |
| Installation | wall mounting |
| Analog Output | Sel. 4÷20mA o 0÷20mA |
| Accuracy | ±1% |
| Repeatability | ±0,2% |
| Linearity | ±0,5% |
| Basic measurement period | 500ms |
| Serial port | RS485 |
| Communication protocol | MODBUS RTU or ASCII+ (opz.) |
| Data logger | on SD card (opt.) or via MODBUS |
| Programmable frequency output | 0÷5000Hz |
| Relay output | n.1 for pulse totalizer or alarm |
| Medium speed range | ±12m/s |
| Unit working temperature | -20÷60°C |
| Instrument humidity | non condensing 85% RH (40°C) |
| Transducer working temperature | TS-2 / TM-1 / TL-1 -30 ÷ +90°C; |
| PT100 sensors working temperature | -40°C +160°C |
| Transducer cable std. length | 5mt |
| PT100 sensor cable std. length | 15mt |
| Power Supply | 230Vac o 10÷30Vdc (depending on model) |
| Dimensions | 200x120x77mm |
| Weight without sensors | 1Kg |
Monday – Friday
08:30 – 12:30
13:30 – 18:00
Monday – Friday
08:00 – 12:30
13:30 – 17:00
