Flow measurement for conductive liquids
Measurement range DN10 ÷ 800
Measurement accuracy: ± 0.5%
GPRS data transmission
Battery powered, max 6 years autonomy
Analog, impulsive and MODBUS RTU outputs
Parameter programming via remote module
IP68 protection
Battery powered RBmag meters do not require an external power supply, therefore they are a valid alternative to conventional mechanical measuring systems and in isolated applications without power supply.
| Flow range | Processing of signals from fluids with speeds up to 10m / s in both directions (bidirectional meter) |
|---|---|
| Coating size / material range | PTFE DN10 -; DN500 |
| Sensor material | SS321 |
| Electronic housing material | epoxy painted aluminum |
| Electrode material | SS316L – Hastelloy C – Titanium – Tantalum – Platinum |
| Measuring range | <0.1m3 / h -; > 18000m3 / h |
| Accuracy | ± 0.5% standard |
| Repeatability | ± 0.1% |
| Fluid conductivity | at least 5 microsiemens / cm |
| Power supply voltage | Battery, 6 years life |
| Sensor tube temperature range | Process temp. Vers. remote: |
| Storage temperature | -40-; 85 ° C |
| Electronic converter temperature range | -20 ° ÷ + 50 ° C |
| Communication protocol | Modbus (opt.) |
| Output signals | Impulsive: open collector |
| Reverse flow | Instantaneous measurement and totalisation of the reverse flow |
| Scope cutoff | Adjustable in units of flow measurement. Below the set value, the instantaneous flow is displayed and the outputs |
| Relative humidity | <= 95% RH |
| Response time (integration) | Adjustable between 0.1 and 99 seconds |
| Compact version protection | IP68 |
| Remote version protection | IP67 / IP68 sensor (on request) |
Monday – Friday
08:30 – 12:30
13:30 – 18:00
Monday – Friday
08:00 – 12:30
13:30 – 17:00
