Flow51

Compact flowmeter
Compact system suitable to be installed upstream from hydraulic modelers (weirs, venturi, palmer bowlus)
Excellent price-performance ratio
Istantaneous and totalized flow
measurement
Measure range 0.3÷6m
MODBUS communication protocol
IP68

SKU f7f580e11d00 Categories , ,

Description

FLOW51 is a compact IP68 ultrasonic flow transmitter, suitable for the installation in flood-prone wells. The measurement is based on the principle of the raising of the water level before restriction, which is used to calculate the value of instantaneous flow in relation of the type of the existing flume.
FLOW51 can be calibrated via MODBUS RTU or VLW601 if used with SGM LEKTRA Venturi flumes, Palmer Bowlus, Parshall flumes, Khafagi Venturi flumes and all the main types of weirs. In case of non-standard flumes the unit can be calibrated by following the linearization table present on the manual or by using a customized flow formula.

Additional information

Housing material

PP

Mechanical installation

1”GAS M – PP fl ange DN100/125 opt.

Protection degree

IP68

Electrical connection

IP68 male connector with 5/10/15/20m linking cable

Working temperature

-25 ÷ +75°C

Pressure

From 0,5 to 1,5 bar (absolute)

Power supply

24Vdc

Power consumption

1.5W

Analog output

4÷20mA max 750ohm

Digital communication

MODBUS RTU

Range

0.3÷6m
In case of non perfectly reflecting surfaces, the maximum distance value will be reduced

Temperature compensation

digital in the working temperature

Accuracy

±0,2% (of the measured distance) not better than ±3mm

Resolution

1mm

Calibration

VLW60T prog. module with 4 buttons; MODBUS

Warm-up

30 minuts

Display

LCDdisplay on VLW60T module (opt.)

Operating Manual

Download

Data Sheet

Download

Related Product

get in touch

Write Us a Message

office hours

Monday – Friday
08:30 – 12:30
13:30 – 18:00

warehouse hours

Monday – Friday
08:00 – 12:30
13:30 – 17:00