Measurement accuracy ≤4% on the reading point
Four-electrode measurement method with temperature compensation
Measurement range from 1μS / cm to 200mS / cm
Max. operating temperature 100 ° C
Maximum pressure 5 bar
Measurements transmission via RS485
MODBUS RTU digital communication
Combine with MCA800 control unit
114CH digital high conductivity sensor, connected to the MCA800 unit, is used for conductivity measurement in waste, industrial and recirculating water. Reliable 4-electrode conductive measurement method thanks to the use of graphite electrodes with compensation of temperature.
| Materials | Electrode body in Epoxy and PPS, Graphite electrodes, PPS probe holder, Viton® O-Rings |
|---|---|
| Probe holder thread | ¾ ”NPT male |
| Probe threads | PG13.5 male |
| Measurement intervals | 1μS / cm to 200mS / cm (K = 0.55 nominal) |
| Method of measurement | conductive with 4 electrodes |
| Calibration method | on 1 point or 2 points with certified standard conductive solutions |
| Accuracy | ≤4% on the reading point |
| Resolution | 1μS/cm |
| Repeatability | ≤0.2% on the measuring point |
| Response time | 5s |
| Maximum refresh time | 1 second |
| Operating temperature | -5 ÷ 100 ° C in non-frozen water |
| Maximum operating pressure | 5 bar |
| Temperature sensor | PT100 |
| Electric absorption | <250mW |
| Mechanical protection | IP68 Sensor + cable |
| Cable length | 10m integral with the sensor (others on request) |
| Power supply | 12÷24Vdc |
| Communication protocol | Modbus RTU |
| Dimensions l x h x d (mm) | 27x213x27mm |
Monday – Friday
08:30 – 12:30
13:30 – 18:00
Monday – Friday
08:00 – 12:30
13:30 – 17:00